USB 2.0 4 PORT PCI CARD

VIA Chipset for PC use only
Compliant with Universal Serial Bus Revision 2.0
Supports Data Transfer Rates of 1.5/12/480 Mbps
Root Hub with 4 downstream facing ports. (Type A Socket)
32-Bit 33 Mhz host interface compliant to PCI Specification release 2.2
Supports PCI Mobile Design Guide Revision 1.1
Supports PCI-Bus Power Management interface Specification release 1.1
Max. 5v/500 mA Power Supply
Supports Windows 98/SE/2000/ME/XP

4 PORT PCMCIA USB1.1/2.0 ADAPTER

Device Type: USB adapter
Interface (Bus) Type: CardBus
Ports Qty: 4
Interfaces: Hi-Speed USB Compatible
Slots: 1 x CardBus

23 IN 1 PCMCIA MEDIA CARD READER/WRITER

PCMCIA Connection
Max data transfer rate of 16.6 Mbps
Supports Compact Flash / Type II, Smart Media, Memory Stick / Pro / Duo, Secure Digital, Multimedia Card

3 PORT FIREWIRE PCI CARD

3 Port Firewire PCI Host Card
Includes Cable and Software
Supports a high transfer rate of 100/200/400 Mbps
Compatible with DV camcorder, Hard Disk Drive,and Printer
And other 1394 audio/video devices including IV, VCR and DVD.
Works with many DV camcorders for digital video creating/editing.
Provides 3 x External 6 pin sockets.
Supports plug and play specifications
Enables connection of up to 63 devices

2 PORT RAID PCI CARD ATA-133

2 Independent IDE/ATA Channels
Compliant with PCI Specification Revision 2.2
Compliant with PCI IDE Controller Specification Revision 1.0
Support PIO0-4, MDMA0-2 and UDM0-5
Support RAID sets (striped, mirrored & mirrored striped) or single drive configuration
Mirrored set error detection, error recovery real-time, auto-rebuild, warm swap
Supports up to four IDE/ATA Devices
Supports large capacity Hard Drives in excess of 137GB
Supports Ultra and Multiword DMA timing modes
CRC (Cyclical Redundancy Check)
128 Bytes Buffer
Built in 80 Pin cable detect circuitry
Supports Bus Master DMA at 133 MB/sec PCI burst rate
3.3V Operating Voltage with 5V tolerant I/O

2X SATA RAID & 1X IDE PCI CARD

2x Serial ATA & 1x Parallel ATA PCI Host Card
Serial ATA - 1.5 Gbps (150 MB/s)
Serial ATA Ports with Striping (RAID 0) or Mirroring (RAID 1)
Compliant with Serial ATA 1.0 Specification
Supports 48-bit LBA (Large Disk), hard drives larger than 137 GB
Supports spread spectrum clocking to reduce EMI
Registers as compatible with Parallel ATA
Single, digital PLL architecture with 1 PLL for both channels
Completely software transparent with Parallel ATA
Supports 48-bit LBA (Large Disk), hard drives larger than 137 GB
Supports Tri-State IDE Signals

COMBO USB2 & IEEE 1394A PCI CARD & HUB

USB 2.0 & IEEE 1394a PCI Card & 5¼ or 3½ Combo Drive Bay Hub
PCI Card has 2x External USB 2.0 Ports and 1x External Firewire (IEEE-1394) 6 Pin
5.25" or 3.5" Bay has 2xUSB 2.0 Ports and 1x6 Pin + 1x4 Pin Firewire Ports
VIA Chipset for PC use only
Max. 5v/500 mA Power Supply
Supports Windows 98/SE/2000/ME/XP (Needs Service Pack 1)
Supports PCI-Bus Power Management interface Specification release 1.1
IEEE 1394a (Firewire 400) with data transfer rates of up to 400Mb/s.
Complies with Standard for IEEE 1394 High Performance Serial Bus.
Supports Plug and Play specification